FIVE GOLDEN RULES OF ALUMINUM COIL STORAGE ENVIROMENTAL STANDARDS

With the increasing use of aluminum, various applications and products of aluminum coils are very affected by the environment. Therefore, many local friends who are engaged in trade and distribution will store aluminum coils for stock, so that they can better serve customers. But the problem will follow, and the improper aluminum coil storage environment will cause irreparable damage to the aluminum coil. Therefore, as an aluminum coil manufacturer, it is the responsibility and obligation to popularize the five golden rules of environmental standards for aluminum coil storage.

1. The storage environment should be naturally ventilated and dry. Don’t put it in a humid and cold area. Everyone knows that aluminum coils are rare metals. If they come into contact with water, they will oxidize. Then the surface of the aluminum coils will be destroyed and a protective film will be produced on the surface. Will produce a piece of white oxidation marks, resulting in damage to the appearance, so a dry natural environment is a prerequisite for the storage of aluminum coils.
2. The aluminum coil is encapsulated with plastic film. If the standard permits, it is best to place it in an area with moisture-proof agent, so that the water in the gas can be digested and absorbed, thereby preventing the problem of oxidation. If the aluminum coil is placed inside the wooden box packaging, then we must ensure that the environmental humidity of the wooden box packaging is lower than 18%, and the temperature of the aluminum coil cannot be higher than 45°C. The two guys don’t have to make a mistake.
3. The airtightness of the aluminum coil packaging. Generally speaking, the aluminum coil has a moisture-proof packaging in the original factory. The appearance will be coiled with a layer of plastic film, and several bags of moisture-proof agent are placed inside to avoid the whole process of transportation. Due to the oxidation caused by humidity or continuous rainy temperature, customers are generally not considered to disassemble or destroy the packaging. This type of packaging is suitable for long-term storage. Note: Even if it must be applied, after the application, it is necessary to put it in a dry and cool place on the remaining aluminum roll bag of the original package. Generally speaking, if the above two points are completed, most of the aluminum coils are not prone to oxidation. The aluminum coil can be stored for a good and long time.
4. If you suddenly change from the ultra-low temperature area to the high temperature area during the storage period, then you don’t need to open the package immediately. Because it is very prone to oxidation, you should open it until the aluminum coil is available, so that it is not easy to appear. The state of oxidation. If there is water or snow leakage in the warehouse, aluminum coils should not be placed, as it is very easy to cause oxidation. This must be kept in mind.
5. Environmental investigation mechanism. Anti-rust aluminum coil is a commodity that power plants and pharmaceutical factories cannot lack for thermal insulation pipes. In order to better apply aluminum coils and increase the service life of aluminum coils, there are also stricter regulations on the storage of aluminum coils in the natural environment. After you buy the anti-rust aluminum coil, you must remember to place it. If it is not placed in time, it will easily cause the anti-rust aluminum coil to oxidize. Therefore, everyone must understand the common storage problems of the anti-rust aluminum coil.

These are the five key points listed for the storage of aluminum coils, from the humidity, temperature, packaging requirements, quality requirements and so on in the storage environment of aluminum coils. I hope everyone can refer to it as much as possible, so as to ensure that the storage of aluminum coils will not oxidize, corrode, and other problems.